What's in the Box
The kiosk ships in two boxes. The smaller box contains the pedestal. Assemble the pedestal first.
Tools Required
The required tools are included in the head unit box:
3/8" socket with ratchet
#2 Phillips screwdriver
Pedestal Components
The pedestal consists of five pieces:
Base plate
Side panels (2)
Front panel
Rear panel
Pedestal Assembly
Insert the front panel (the one with graphics and threaded bolts) into the tapered front end of one side panel.
Hand-tighten the three nuts for that side onto the threaded bolts.
Repeat for the other side panel.
Tighten all six nuts securely with the ratchet.
Place the assembled upper portion onto the base plate, aligning the threaded bolts with the holes in the base.
Secure it to the base using six nuts, then tighten with the ratchet.
Note: At step 4, the two side panels and the front panel form the upper portion of the pedestal.
Head Unit Installation
Loosen the screws on the bottom of the head unit.
Place the head unit on top of the pedestal, making sure the screws align with the keyhole slots on the top of the pedestal.
Tighten the screws on the bottom of the head unit to secure it in place.
Power Cord Routing
Attach the included black extension cord to the white power cord at the bottom of the head unit.
Route the extension cord down through the hole in the pedestal base, underneath the pedestal, and out the back of the unit.
Rear Panel Installation
Use the six included Phillips-head screws to attach the rear panel to the pedestal.
Need Help?
Scan the QR code on your assembly sheet for a step-by-step video or contact your Silencer Shop dealer rep for assistance.